How To Secure Shower Head Flange?

After years of shower head installation, we may see that its flange has become loose or needs a replacement. But, how to secure shower head flange? Well, that’s very easy.

You need to first unwind your shower head, and remove the shower arm and the flange. Then take a flange with a set of screws and fix the shower arm on the wall. Then slide the new flange over the shower arm and secure it by turning it counterclockwise. Then seal the gaps with some plumber’s putty.

These steps will seem a bit confusing now. That’s why we are going to have a brief discussion on this process.

How To Secure Shower Head Flange?

The shower head flange plays a great role when it comes to the convenience of our shower experience. So make sure you secure it properly. The below traits and help you with that.

Get A New Shower Arm And Flange

Nowadays, modern shower arms come with hefty brass. Likewise, modern flanges contain thick gauge brass which could be rare. If you don’t want to struggle with the flange shortly, opt for a flange that has a set screw to tighten it down to the shower arm. Hence, the flange won’t slide and can be easily secured.

Unthread The Shower Head

Before you secure your shower head flange, remove your existing shower head. For that, you will need an adjustable wrench to hold the grip of the shower head. Then rotate it a bit unless the shower head becomes loose. Now you can unthread the shower head with your arms.

Remove The Silicone

Next, take a utility knife to remove silicone or plumber putty from the existing flange. This is required if the flange is stuck in the wall.

Remove The Shower Arm

Now it is time to remove the shower arm. Take a screwdriver, and insert it inside the hole of shower harm for leverage. Then unwind the shower arm by rotating the screwdriver counterclockwise. This will bring out both the shower arm and flange.

Thread The Shower Arm

After you remove the shower arm and flange, take the new shower arm and flange that comes with a set of screws. Well, slide the new flange over the new shower arm and wrap both ends of the shower arm with Teflon tape. Make sure not to wrap the tape in more than 10 turns. This step will give a nicer grip while screwing the shower arm.

Secure The Shower Arm

Afterwards, guide the shower into the hole in the wall where your previous shower arm was. Then thread the shower arm into the wall by rotating the screwdriver in a clockwise motion.

Secure the Flange

When the shower arm starts to get tight, go around one last turn and square the shower arm up in your shower. Then slide the flange so that it flushes against the wall and tighten the screw down.

If there is any gap visible between the wall and the flange, seal that up with silicone or plumber putty.

Frequently Asked Questions

What is a shower head flange?

Flange is a shower component which is also known as a pipe hole cover. When you attach the shower arm to the hole in the wall, the flange will cover that hole to avoid any water spillage or maybe just for decoration.

How does the shower head flange work?

Flanges offer a seal to the shower arm which we call gasket compression. It is because a shower head flange gives pressure to the mating surface of the shower arm and wall.

How to secure a shower head?

To secure a shower head you need to attach it by screwing in the shower arm. For that, you need to turn the shower head counterclockwise with pliers or hands unless it becomes tight.

How to seal a shower head arm?

Before sealing a shower arm, remove its old tape and clean the threads. Don’t forget to clean the mineral deposits as well. Then wrap the new plumber’s tape over the shower arm’s thread. Now the shower arm can hold a better grip to the shower head.

Final Verdict

Hopefully, the process of securing the flange is clear to you. But yet, if you have a question, about how to secure shower head flange, don’t worry. We can make it clear to you again.

Just remove your old shower head, old shower arm, and old flange. Then secure the new shower arm on the wall along with the new flange. Then you can put the shower head again in its place, and you are done. If you find any trouble securing the flange, maybe the flange is the problem.

It means you need the right type of flange that can remain in place. For more information, you can consult with a plumber.

Leave a Comment