How to remove flow restrictor from Moen handheld shower head? To remove the flow restrictor from the Moen shower head, you have to take out the washer from its nut. Then flip the valve upside down and hit it from behind with a screwdriver. You will see the whole restrictor has come out.
Well, this process requires some safety concerns. For this reason, we are going to guide you through this removal process with some brief steps.
How To Remove Flow Restrictor From Moen Handheld Shower Head?
The flow restrictor in Moen handheld shower heads usually restricts the water flow and delays our shower time. That’s why many people consider taking the flow restrictor out to get the proper water pressure. If you also find this trick helpful, make sure you follow the below steps.
Gather Supplies
In order to remove the flow restrictor from a Moen handheld shower head, you must be ready with an adjustable wrench and a screwdriver. Then turn off the water valve to avoid water splitting during the process.
Unscrew The Shower Head
Next, unscrew the handheld shower head from the hose. To do this, grip the nut connecting the handheld shower head to the hose with the adjustable wrench
Then turn it counterclockwise until it becomes loose so that you can remove the shower head by hand. Be cautious not to damage the finish of the shower head or hose while doing this.
Remove The Washer
Hopefully, there is a shower ball in your shower head’s nut. Simply undo that by rotating it. Now, you will get the washer which you need to pop out with the wrench.
After you take out the washer, you will see a strainer kind of thing, behind it there is an O-ring.
Take Out The Flow Restrictor
Now flip your shower head’s ball upside down and insert the screwdriver in its hole. Then tap the screwdriver and the whole flow restrictor will come out. If you have a good water pressure, you can only remove the O-ring of the flow restrictor. But if the water pressure, you may take out the whole flow restrictor. However, to remove the O-ring you can use the same adjustable wrench to pop it off.
Set Everything In Place
Afterward, put the washer in its place by reversing the step, i.e. tapping the screwdriver from behind. Then fix the ball on the side of the shower arm and place its nut like it was. Now that you don’t have a flow restrictor inside, your Moen shower head will flow more water than before.
Frequently Asked Questions
What does a Moen shower head flow restrictor look like?
The flow restrictor in a Moen handheld shower head has a metal metal housing. Inside it, there is a plastic substance that acts like a flow restrictor.
Should you remove the flow restrictor from Moen’s handheld shower head?
Removing the flow restrictor of any shower head is not recommended unless there are chronic issues with the water pressure. Because availing more water pressure in one’s home can decrease the water pressure in another’s home.
Where is the flow restrictor in a Moen handheld shower head?
The flow restrictor is located in the showerhead’s back of its neck. That’s why you have to first open the washer and then get its flow restrictor out.
Final Thoughts
Hopefully, you have now taken out the flow restrictor from your Moen handheld shower head. All you need is just, just remove the washer and pop the O-ring after pushing the valve from the back.
For more safety, use a towel around your shower head. Because sometimes, water spillage can disrupt the process and create more mess. And yes, don’t forget to screw back the shower head with the shower arm. You can do it by your hands alone.
This is William D. Morey, My profession is to write about Shower Heads and tell people about Shower heads details and Information.
